Question: Can You Use Thompson Water Seal Over Stained Wood?

What’s the best way to apply Thompson’s Water Seal?

Apply sealer or stain to the deck boards, using the same techniques used on the railings and your choice of applicator: paint pad, paint roller, paintbrush, or garden sprayer.

Apply the finish to 10 to 15 square feet of boards at a time, then wipe up any excess with a rag or your applicator..

Does polyurethane make wood waterproof?

No, polyurethane does not make hardwood waterproof, but it does make wood water resistant. Polyurethane gives hardwood its protection. … Polyurethane is a thin layer and is discontinuous (with minor holes). Even small scratches and abrasions will allow water to penetrate the surface if you only have 1 coat.

Can you stain wood without sanding?

Minwax® PolyShades® is an easy way to change the color of your currently stained or polyurethane finished wood. There’s no stripping or heavy sanding necessary to remove the old finish!

Is Thompson Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

How long after staining can you seal?

Every finish and stain is different, and drying times can vary widely from brand to brand or product to product. As a rule of thumb, you should wait 24-48 hours to allow the stain to fully dry before applying your polyurethane. If you’re extra cautious, you may even choose to wait 72 hours before applying your poly.

What is the longest lasting deck stain?

Opaque: Also called “solid,” this stain contains the most pigment and it will protect the wood longest, requiring recoating only every four to five years. It’s also the densest and will hide the wood grain completely.

Why is my deck slippery after staining?

Mold, mildew, moss, pollen or algae growing on a wooden deck in the shade or in a moist climate can become slippery, posing a special risk to elderly homeowners or guests. A prudent maintenance schedule can help keep the deck clean and reveal the natural grain of the wood, providing traction and slip-resistance.

Should you put a sealer over stain?

Applying a topcoat sealer is not required, but a finish protects the stained wood from scratches and keeps it from fading over time. If applying a polyurethane finish with a brush, apply one to two coats. … Be prepared for drying time to take at least a day.

What do you use to seal wood after staining?

Most stains should be sealed to prevent bleeding. After smoothing the stained wood, apply a sealer coat of thinned shellac, sanding sealer, or other appropriate sealer. Do not use shellac with NGR or water-base stains. If you plan to finish the piece with polyurethane, make sure the sealer is compatible.

Can you seal a deck after staining?

Most of the time, stains also contain a protective sealant. It’s a good idea, though, to re-seal your deck (or check that it needs to be re-sealed) once a year. Water-based stains can adhere to water or oil-based coatings already present on the wooden surface.

Can you waterproof over stained wood?

There are three surefire ways to waterproof your wood for years to come. Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish. Seal the wood with coating of polyurethane, varnish, or lacquer. Finish and waterproof wood simultaneously with a stain-sealant combo.

Do you have to put a clear coat over stained wood?

Do I have to apply a clear coat after staining? While staining creates a rich, deep color that highlights natural wood grain, it does not provide long-term protection. Without a protective top coat, wood can be damaged easily due to contact with water, food, or sharp objects.

What happens if you don’t seal stained wood?

A: If you don’t apply some kind of sealer the wood will be dried-out and lifeless. … The final step in staining wood is to wipe off any excess, so the process leaves nothing behind. A finish is typically applied after a piece has already been stained and is normally applied with a paintbrush.

Can you seal wood without staining?

If you want to seal the wood without changing the color, the first thing that you will need is a water-based polyurethane sealer. However, if you are not in favor of this, there is an alternative. You can use acrylic lacquer if you want.

Is it better to seal or stain a deck?

A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

Can you put Thompson Water Seal over stained wood?

And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain. The beauty of all our water-based sealers and topcoats is that they’ll level and adhere to whatever solvent- or oil-based stain you’ve used.

How many years does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years. This is dependent on conditions such as orientation of the wall and local climate.

What is the best waterproof sealer for wood?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

What is the best clear coat for stained wood?

Polyurethane wood finishesPolyurethane wood finishes are synthetic coatings that prove highly durable and water resistant, making them the best clear coat for wood protection.

What goes on first stain or sealer?

Once you’ve chosen a sealant strength, apply it to the end grain before you stain. Sand off any sealer that gets on the face of the board before you stain.